P.BACCI Double Sided Automatic Slot
Mortising Machine 
Model : MOD

Specification :

  • Cast iron frame
  • Sliding of table on ball bushings and and ground guides ground and hardened guides
  • Adjustment of slot width with decimal digital read out
  • Hydraulic table feed
 Slot P.BACCI Single Sided Cutting-Boring-
Moulding Machine 
Model : TTF-1 

Specification :
 

  • Spindle oscillation on hardened and ground guides ground and hardened guides
  • High precision cutterholder spindles supported by angular contact bearing. 
  • Cast iron frame
  • Hydraulic control of table stroke and working units.
  • Machine controlled by PLC to allow anycombination of thecutting-boring- moulding operations in any sequence
P.BACCI Double End Automatic Rounding Off 
Tenoning Machine With Hopperfeed Type CSF2 
Model : TSD/CSF2 Spindles

Specification :

  • The double end rounding off tenoning machine with high output makes tenons on both ends and holes at the same time of the piece at the same time, will all possible angles
  • Continuos revolution of cutter around the piece. 
  • Possibility of horizontal and vertical inclination of very short piece. bronze grinded dovetail guides
  • Thickness, inclination and width of tenons is adjusted by external handles, even when the machine is working.
  • Possibility to cut off, adjusting the thickness to "0". 
  • Working haeds mounted on angular contact high precision bearing to eliminate clearances 
  • Motorized approaching of the R.H. heads 
  • Cast iron frame to eliminate vibrations 
 P.BACCI Automatic Double-Sided Oscillating
Mortising Machine With 4 Horizontal Spindles
Model : MX/3L-3C

Specification :

  • The oscillating mortising machine bores slots and holes at the same time 
  • The oscillating carriages are sincronized but independent as regards the oscillating width
  • The spindles are adjustable on carriages by bronze grinded dovetail guides
  • Carriages slide on guides made by 2 chromed tempered bars with 40 mm
  • Carriages slide on guides with sel flubricating ball bushings.
  • Inclination of guides by a rack mechanism to grant the parallelism between bars.
  • Cast iron frame to eliminate vibrations due to alternative movements of carriages.
  • Ground cast iron tables to assure a perfect planarity.
  • Oscillation of carriages by gear motors.
  • External adjustments (position of carriages, stroke length, inclination of guides)
  • Boring operation possible by the adjustment of the carriage oscillation on "O".
P.BACCI Fully Automatic Copying Lathe 
With 4 Horizontal Chucks
Model : T4MO

Specification :

  • Automatic approaching of cutter-holder to the template at the beginning of cycle sands elements of chairs, tables, armchairs, frame etc

    • Automatic disapproaching of cutter-holder from template at the end of cycle carriage in the beginning position. of the most complicated profiles.
  • Cast iron frame eliminating vibrations. 
 P.BACCI Automatic Copying Shaper Machine
With 2 Heads. Working Length 1600 mm 
Model : FC2/1600 

Specification :

  • The copying-shaping machine copies and sands elements of chairs, tables, armchairs, frame etc
  • The high sliding of the working units and of table allows the execution of the most complicated profiles.
  • The units feed can take place both in perpendicular and inclined direction to the table
  • This second possibility enable a perfect execution of round end profiles.
  • The machine is equipped with the automatic control of table feed speed
  • The working table, driven by a hydrauli c control,

    • slides on ground steel bars by selflubricating bronze bushings.